Terminal access

To access the terminal you will have to create a special cable to connect a PC to the NA-1400. This process is described in:

Once the cable is connected the terminal can be accessed. For this you can use a terminal application e.g. Hyperterminal for Windows. The communication settings are: 115200 baud 8N1.

Baudrate 115k2
Data bits 8
Parity None
Stop bits 1
Flow control None

Logon

The default username/password combination is: root/secret

 
doc/software/terminal.txt · Last modified: 2006/08/01 20:15 by admin